Contact Us Todayo: 405.288.0233f: 405.288.0238
Item ID
TC7B6021S
Description
LX Series Split System Air Conditioner, 5 Ton, 17 SEER / 1-Stage, 13.5 EER, R-410A, 208-230V-1Ph-60Hz, Scroll Compressor, 3/8" OD Liquid Line, 1-1/8" OD Vapor Line
Manufacture
luxaire
Item Desc
LUXAIRE RES SPLT AC 17S 5T R410A
Charge Per Foot, Oz#
0.75
Coil - Face Area Sq# Ft#
27.40
Coil - Fins / Inch
23
Coil - Rows Deep
1
Compressor Amps - Locked Rotor
152.5
Compressor Amps - Rated Load
23.7
Compressor Type
Scroll
Depth
34-1/4"
EER
13.5
Factory Option
Standard
Fan Diameter Inches
26
Fan Motor - Nominal CFM
4275
Fan Motor - Nominal RPM
834
Fan Motor - Rated HP
1/3
Fan Motor - Rated Load Amps
2.80
Generation
1st Gen
Length
42-3/4"
Liquid Line Set OD
3/8"
Max# Overcurrent Device Amps
50
Min# Overcurrent Device Amps
35
Minimum Circuit Ampacity
32.4
Nominal Capacity
5 Ton
Nominal Series Efficiency And Staging
17 SEER / 1-Stage
Normal Voltage Range
187 to 252
Operating Weight Lbs#
265
Product Type
Air Conditioner
Refrigerant
R-410A
Sound Power Ratings dBA
74
Unit Charge (Lbs# - Oz#)
7 - 14
Vapor Line Set OD
1-1/8"
Voltage-Ph-Hz
208/230-1-60
Mfg Part Number
TC7B6021S
• High System Efficiency - Optimized system designs provide ENERGY STAR coil-only ratings in all tonnages. Targeted furnace and air handler matches meeting Federal Tax Credit efficiencies are available for almost all tonnages and markets. • Easier Installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. The factory installed filter drier and factory charge for a 15-Ft line-set means less time spent brazing and charging the system. • Accessible Information - QR code on unit provides quick access to technical documents and warranty information. • Durable Finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Titanium colored powdercoat paint further protects external panels. • Quality Coils - The high efficiency microchannel aluminum coil is manufactured using an improved material system providing reliable performance and smaller unit size. • Rugged Coil Protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. • Protected Compressor - Compressors are protected internally by a high pressure relief valve and a temperature sensor, and externally by the system high and low pressure switches. The liquid line filter-drier is factory installed to protect the compressor against moisture and debris. • Reliable Operation - ECM ball bearing fan motors provide superior performance in extreme temperatures. • Environmentally Friendly - CFC-free R-410A refrigerant delivers environmentally friendly performance with zero ozone depletion. • Top Discharge - Warm air is blown up, away from the structure and any landscaping and allows compact location on multi-unit applications. • Low Operating Sound Levels - Specific sound and vibration development tests provide a design sound performance of 74 dBA or lower. Swept-wing fan blades are featured on units 2.5-Tons and higher. Compatible accessories for further sound reduction are also available. • Better Service Access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, swing out control box for full corner access, and removable fan guard allow easy access for unit maintenance. • Agency Listed - Safety certified by CSA to UL 1995 / CSA 22.2. Performance certified to ANSI/AHRI Standard 210/240 in accordance with the Unitary Small Equipment certification program.