Contact Us Todayo: 405.288.0233f: 405.288.0238
Item ID
TM9E100C20MP12
Description
95.5% AFUE LX Series Standard ECM Single Stage Multi-Position Residential Gas Furnace, 95 MBH Input, 2000 MBH Output, 2000 CFM Nominal, Natural Gas
Manufacture
luxaire
Item Desc
Luxaire Furnace 95.5% 100Kbtu 2000 cfm
AFUE
95.0%
Air Temp# Rise °F
50-80
Approximate Operating Weights Lbs
145
Blower - Amps
8.4
Blower - HP
3/4
Blower Size - Inch
11 x 11
Cabinet Dimensions - A
21"
Cabinet Dimensions - B
19-7/8"
Cabinet Dimensions - C
18-1/4"
Cabinet Size
C
Gas
Natural
Input MBH
95
Max Over-Current Protect
15
Max# Outlet Air Temp °F
190
Min# Wire Size (AWG) @ 75 ft# One Way
14
Nominal CFM (m3/min)
2000
Output MBH
2000
Total Unit Amps
10.9
Mfg Part Number
TM9E100C20MP11
• Easily applied in upflow, horizontal left or right, or downflow installation with minimal conversion necessary. • Compact, easy to install, ideal height 33" tall cabinet. • Blower-off delay for cooling SEER improvement. • Easy access to controls to connect power/control wiring. • Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation. • Low unit amp requirement for easy replacement application. • Convertible to use propane (LP) gas. • Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability. • 100% shut off main gas valve for extra safety. • 5 speed, direct drive Standard ECM style high efficiency DC motor. • 24V, 40 VA control transformer and blower relay supplied for add-on cooling. • Hi-tech tubular aluminized steel primary heat exchanger. • Secondary heat exchanger made of corrosion resistant stainless steel materials. • Timed on, adjustable off blower capability for maximum comfort. • Blower door safety switch. • Solid removable bottom panel allows easy conversion. • Airflow leakage less than 1% of nominal airflow at duct performance testing conditions. • No knockouts to deal with, making installation easier. • Movable duct connector flanges for application flexibility. • Quiet inducer operation. • Inducer rotates for easy conversion of venting options. • Fully supported blower assembly for easy access and removal of blower. • External air filters used for maximum flexibility in meeting customers IAQ needs. • Protection included from air intake, exhaust vent, or condensate blockage. • Patent pending self priming internal condensate trap design for easy installation. • Venting applications - may be installed as a either 2-pipe (sealed combustion) or single-pipe vent (using indoor combustion air. • No special vent termination required. • 1/4 turn knobs provided for easy door removal. • High-efficiency blower motor for lower electrical power usage and improved A/C SEER ratings. • Insulated blower compartment for terminal and acoustic performance.