Contact Us Todayo: 405.288.0233f: 405.288.0238
Item ID
TG8S130D20MP11
Description
80% AFUE Gas-Fired Residential Single Stage Multi-Position Gas Furnace, 130 MBH Input, 104 MBH Output, 2000 CFM Nominal, Natural Gas
Manufacture
luxaire
Item Desc
Luxaire 130Kbtu 80% 2000cfm
AFUE
80%
Air Temp# Rise °F
35-65
Approximate Operating Weights Lbs
135
Blower - Amps
14.5
Blower - HP
1
Blower Size - Inch
11 x 11
Cabinet Dimensions - A
24-1/2"
Cabinet Dimensions - B
23-3/8"
Cabinet Dimensions - C
17.5"
Cabinet Size
D
Gas
Natural
Input MBH
130
Max Over-Current Protect
20
Max# Outlet Air Temp °F
190
Min# Wire Size (AWG) @ 75 ft# One Way
12
Nominal CFM (m3/min)
2000
Output MBH
104
Total Unit Amps
17.0
Mfg Part Number
TG8S130D20MP11
• Easily applied in upflow, horizontal left or right, or downflow installation with minimal conversion necessary. • Compact, easy to install, ideal height 33" tall cabinet. • Blower-off delay for cooling SEER improvement. • Easy access to controls to connect power/control wiring. • Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation. • Low unit amp requirement for easy replacement application. • Single wire twinning or staging feature available. • Convertible to use propane (LP) gas. • Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability. • 100% shut off main gas valve for extra safety. • 4 speed, direct drive PSC motor. • 24V, 40 VA control transformer and blower relay supplied for add-on cooling. • Hi-tech tubular aluminized steel primary heat exchanger. • Timed on, adjustable off blower capability for maximum comfort. • Blower door safety switch. • Low NOx models have been designed to meet specific code requirements. • Airflow leakage less than 1% of total airflow at duct performance testing conditions. • No knockouts to deal with, making installation easier. • Movable duct connector flanges for application flexibility. • Quiet inducer operation. • Inducer rotates for easy conversion of venting options. • Fully supported blower assembly for easy access and removal of blower. • External air filters used for maximum flexibility in meeting customers IAQ needs. • Venting applications - may be installed as a common vent with other gas-fired appliances or use a masonry chimney. • 1/4 turn knobs provided for easy door removal.