Contact Us Todayo: 405.288.0233f: 405.288.0238
Item ID
CM48CBCA1
Description
4 Ton, Multi-Position Full Cased Luxaire Evaporator Coil, 1600 Rated CFM, 21.0" Cabinet Width, 33" Height, 21" Width, 20" Opening Width
Manufacture
Luxaire
Item Desc
Luxaire 4T Multi Coil w. TXV
Application
Cooling /Heat Pump
Cabinet Width
21.0"
Coil Size
(3) 24 x 17.1
Coil Type
MaxAlloy Aluminum Tube
Face Area (Sq# Ft#)
8.55
Fin Type
Sine Wave
Fins Per In#
14
Generation
1st Gen
Height
33"
Installed Weight (lbs)
64
Metering Device
TXV Valve Size
Model
CM48C
Nominal Unit Capacity
4 Ton
Opening Width
20"
Position Motor Type
Full Cased, Multi-Poise
Product Type
Indoor Coil
Rated CFM
1600
Refrig# Conn#Types
Sweat
Refrigerant Connections Liquid
3/8
Refrigerant Connections Vapor
7/8
Rows Deep
2
Shipping Weight (lbs)
65
Tube Dia#
3/8
Tube Geometry
1 x 0.866
Width
21"
Mfg# Part Number
CM48CBCA1
• CM series full cased coils have the added flexibility of multiposition installation. They are shipped as upflow / horizontal left and are easily convertible to downflow / horizontal right. Select CM Models are available with a factory manufactured electronic expansion valve. • Rigid Case Construction - an interior endoskeleton provides structural support eliminating screw heads protruding from the side of the cabinet that could damage property when being installed. • Cabinet – Constructed of heavy gauge galvanized steel with a primer and finish coat providing a high quality corrosion resistant finish. • MaxAlloy Coil - Long life aluminum coils built to deliver lasting performance, efficiency and reliability. • Foil faced insulation -The cabinet is insulated with a single piece of cleanable foil faced insulation retained by the endoskeleton. The cabinet design is such that all edges of the insulation are contained. • Electronic Expansion Valve (EEV) - Factory installed on select CM models and sized to match with specific high-efficiency variable capacity outdoor units. • Compact Cabinet - With the coil and access doors removed the cabinet has a 20.5” casing depth in all models, which provide ease of attic access and space constrained applications. • Thermoset Drain Pan - Corrosion and UV resistant with a positive slope for proper drainage. Low water retention design maximizes indoor air quality and consumer comfort. • Low Leakage Cabinet Design - Fully gasketed doors minimizes air leakage to no more than 2% when measured at 1.0” esp. minimizing conditioned air leakage and infiltration. • Duct Flange - Three sided duct flange is supplied to be field installed when required. • Thermostatic Expansion Valves - Select factory mounted as well as field mounted models available utilizing chatleff fittings, no brazing required.