Contact Us Todayo: 405.288.0233f: 405.288.0238
Item ID
CM36BXA1
Description
3 Ton, Multi-Position Full Cased Luxaire Evaporator Coil, 1200 Rated CFM, 17.5" Cabinet Width, 25-5/8" Height, 17-1/2" Width, 16-1/2" Opening Width
Manufacture
Luxaire
Item Desc
Luxaire Multi 3T Alum Coil
Application
Cooling /Heat Pump
Cabinet Width
17.5"
Coil Size
(3) 20 x 17.1
Coil Type
MaxAlloy Aluminum Tube
Face Area (Sq# Ft#)
7.12
Fin Type
Sine Wave
Fins Per In#
14
Generation
1st Gen
Height
25-5/8"
Installed Weight (lbs)
54
Metering Device
No Valve (Flex Coil)
Model
CM36B
Nominal Unit Capacity
3 Ton
Opening Width
16-1/2"
Position Motor Type
Full Cased, Multi-Poise
Product Type
Indoor Coil
Rated CFM
1200
Refrig# Conn#Types
Sweat
Refrigerant Connections Liquid
3/8
Refrigerant Connections Vapor
3/4
Rows Deep
2
Shipping Weight (lbs)
55
Tube Dia#
3/8
Tube Geometry
1 x 0.866
Width
17-1/2"
Mfg# Part Number
CM36BXA1
• CM series full cased coils have the added flexibility of multiposition installation. They are shipped as upflow / horizontal left and are easily convertible to downflow / horizontal right. Select CM Models are available with a factory manufactured electronic expansion valve. • Rigid Case Construction - an interior endoskeleton provides structural support eliminating screw heads protruding from the side of the cabinet that could damage property when being installed. • Cabinet – Constructed of heavy gauge galvanized steel with a primer and finish coat providing a high quality corrosion resistant finish. • MaxAlloy Coil - Long life aluminum coils built to deliver lasting performance, efficiency and reliability. • Foil faced insulation -The cabinet is insulated with a single piece of cleanable foil faced insulation retained by the endoskeleton. The cabinet design is such that all edges of the insulation are contained. • Electronic Expansion Valve (EEV) - Factory installed on select CM models and sized to match with specific high-efficiency variable capacity outdoor units. • Compact Cabinet - With the coil and access doors removed the cabinet has a 20.5” casing depth in all models, which provide ease of attic access and space constrained applications. • Thermoset Drain Pan - Corrosion and UV resistant with a positive slope for proper drainage. Low water retention design maximizes indoor air quality and consumer comfort. • Low Leakage Cabinet Design - Fully gasketed doors minimizes air leakage to no more than 2% when measured at 1.0” esp. minimizing conditioned air leakage and infiltration. • Duct Flange - Three sided duct flange is supplied to be field installed when required. • Thermostatic Expansion Valves - Select factory mounted as well as field mounted models available utilizing chatleff fittings, no brazing required.