Contact Us Todayo: 405.288.0233f: 405.288.0238
Item ID
AVV50CE321
Description
5-Ton, 3/4 HP Motor, Single Piece Variable Speed ECM Communicating Acclimate Series Air Handler With Electronic Expansion Valve, Multi VS ECM, 1050 RPM, 1 Phase, 60 Hertz, 208/230 Voltage, 21.0" Cabinet Width
Manufacture
Luxaire
Item Desc
Luxaire 4T AHU ECM w/ EEV
Application
Cooling /Heat Pump
Blower - Diameter x Width
11 x 10
Cabinet Width
21.0"
Coil Size
(2) 28 x 17.1
Dimensions (C)
31-3/8
Dimensions (D)
17-3/4
Dimensions (E)
20"
Face Area (Sq# Ft#)
7.6
Filter Permanent Type Kit
1PF0602
Filter Size
20 x 20 x 1
Filter Type
Disposable or Permanent
Fin Type
Sine Wave
Fins Per In#
12
Full Load Amps
7.0@230V
Generation
1st Generation
Height
60
Minimum Circuit Ampacity
9.1(208V), 8.8(230V)
Model
50C
MOP
15
Motor FLA
7.3(208V), 7.0(230V)
Motor HP
3/4 HP
Motor Nominal RPM
1050
Nominal Unit Capacity
5-Ton
Options
Communication and Variable
Position Motor Type
Multi VS ECM
Product Type
Single Piece Air Handler
Rated CFM
1600
Refrig# Conn#Types
Sweat
Refrigerant Connections Liquid
3/8
Refrigerant Connections Vapor
7/8
Mfg# Part Number
AVV50CE321
• Rigid Case Construction - an interior endoskeleton provides structural support eliminating screw heads protruding from the side of the cabinet that could damage property when being installed. • Cabinet - Constructed of heavy gauge galvanized steel with a primer and finish coat providing a high quality corrosion resistant finish. • MaxAlloy Coil - Long life aluminum coils built to deliver lasting performance, efficiency and reliability. • Foil faced insulation - The entire cabinet is insulated with a single piece of cleanable foil faced insulation retained by the endoskeleton. The cabinet design is such that all edges of the insulation are contained. • Electronic Expansion Valve (EEV) - Factory installed and sized to match with specific HL20 and AL21 high-efficiency variable capacity outdoor units. • Compact Cabinet - With the coil and access doors removed the cabinet has a 20.5” casing depth in all models, which provide ease of attic access and space constrained applications. • Thermoset Drain Pan - Corrosion and UV resistant with a positive slope for proper drainage. Low water retention design maximizes indoor air quality and consumer comfort. • Low Leakage Cabinet Design - Fully gasketed doors minimizes air leakage to no more than 2% when measured at 1.0” esp. minimizing conditioned air leakage and infiltration. • Integrated Filter Rack - All models have an internal filter rack for use with 1” thick standard size filters. • Electric Heat Kits - 208/230V single and three phase field installed electric heat kits are available from 5 through 25 kW. Make sure to check the technical guide for proper application. Electric heat kits are common between the different air handler families including the modular designs. • ECM Variable Speed Motors - All models use variable speed ECM motors for efficient, quiet operation. The blower can be independently controlled to optimize the system for specific comfort requirements. • Duct Flange - Duct flanges are supplied to be field installed when required.